Crown 8-600ND, 8 Channel Network Amplifier with AVB Technology

Features:

• Crown’s DriveCore technology includes five patents, providing best-in-class versatility and durability
• The next generation of PWM technology using cutting edge Class D amplifier topologies
• Minimum Guaranteed Power Ratings
• Compatible with HiQNet Audio Architect™ software
• Direct drive ‘constant voltage’ capabilities on channel by channel basis at 70Vrms and 100Vrms
• Advanced PFC universal power supply; universal AC input accepts 100 – 240VAC, 50/60Hz (+/- 10%)
• TCP/IP based protocol in HiQnet for network monitoring and control
• Revolutionary cooling system; focuses airflow on parts that need it most for maximum efficiency
• Audio Video Bridging (AVB) Etheet transport port
• Network & Control Features:
  • Continuous load monitoring
  • Comprehensive error reporting
  • Pilot tone monitoring
  • Programmable general purpose input/output (GPIO) ports
• Digital Signal Processing (DSP) Features:
  • LevelMAX™ limiters for inputs and outputs with thermal limiting
  • Input and output delay
  • Input and output EQ
  • Signal generator
  • Crossover

Specifications:

• Power Output:
  • 2 Ohms:  300 W
  • 4 Ohms:  600 W
  • 8 Ohms:  600 W
  • 16 Ohms:  300 W
  • 70V:  600 W
  • 100V:  600 W
• Frequency Response (8 Ohms, 20 Hz - 20 kHz):  +/- 0.25 dB
• AVB Signal-to-Noise Ratio (ref. rated power, 8 Ohms, 20 Hz - 20 kHz):  >10 dB
• Analog Input Signal-to-Noise Ratio (ref. rated power, 8 Ohms, 20 Hz - 20 kHz):  > 104 dB
• Total Harmonic Distortion (at full rated power, 20 Hz - 20 kHz):  0.35%
• Voltage Gain (at Maximum Level Setting):  34 dB
• Damping Factor (20 Hz - 100 Hz):  > 1000
• Input Impedance (nominal balanced, unbalanced):  10 kOhms, 5 kOhms
• Maximum Input Level before Compression (low gain mode):  +20 dBu
• Load Impedance Stereo/Dual Mode:  2 - 16 Ohms; 70Vrms and 100Vrms
• Load Impedance Bridge Mono:  4 - 16 Ohms, 140Vrms and 200Vrms
• Cooling:  Continuously variable speed forced air, front to back airflow
• Maximum Fan Noise (re dBA SPL @ 1M):  47
• Required AC Mains (+/- 10%):  100V - 240V ~50/60 Hz
• IEC Power Connector:  20A IEC
• Physical Specifications:
  • Width:  19" (48.3cm)
  • Height:  3.5" (8.9cm)
  • Depth:  17" (42.5cm)
  • Weight:  30 lbs (13.6 kg)

Features:

• Crown’s DriveCore technology includes five patents, providing best-in-class versatility and durability
• The next generation of PWM technology using cutting edge Class D amplifier topologies
• Minimum Guaranteed Power Ratings
• Compatible with HiQNet Audio Architect™ software
• Direct drive ‘constant voltage’ capabilities on channel by channel basis at 70Vrms and 100Vrms
• Advanced PFC universal power supply; universal AC input accepts 100 – 240VAC, 50/60Hz (+/- 10%)
• TCP/IP based protocol in HiQnet for network monitoring and control
• Revolutionary cooling system; focuses airflow on parts that need it most for maximum efficiency
• Audio Video Bridging (AVB) Etheet transport port
• Network & Control Features:
  • Continuous load monitoring
  • Comprehensive error reporting
  • Pilot tone monitoring
  • Programmable general purpose input/output (GPIO) ports
• Digital Signal Processing (DSP) Features:
  • LevelMAX™ limiters for inputs and outputs with thermal limiting
  • Input and output delay
  • Input and output EQ
  • Signal generator
  • Crossover

Specifications:

• Power Output:
  • 2 Ohms:  300 W
  • 4 Ohms:  600 W
  • 8 Ohms:  600 W
  • 16 Ohms:  300 W
  • 70V:  600 W
  • 100V:  600 W
• Frequency Response (8 Ohms, 20 Hz - 20 kHz):  +/- 0.25 dB
• AVB Signal-to-Noise Ratio (ref. rated power, 8 Ohms, 20 Hz - 20 kHz):  >10 dB
• Analog Input Signal-to-Noise Ratio (ref. rated power, 8 Ohms, 20 Hz - 20 kHz):  > 104 dB
• Total Harmonic Distortion (at full rated power, 20 Hz - 20 kHz):  0.35%
• Voltage Gain (at Maximum Level Setting):  34 dB
• Damping Factor (20 Hz - 100 Hz):  > 1000
• Input Impedance (nominal balanced, unbalanced):  10 kOhms, 5 kOhms
• Maximum Input Level before Compression (low gain mode):  +20 dBu
• Load Impedance Stereo/Dual Mode:  2 - 16 Ohms; 70Vrms and 100Vrms
• Load Impedance Bridge Mono:  4 - 16 Ohms, 140Vrms and 200Vrms
• Cooling:  Continuously variable speed forced air, front to back airflow
• Maximum Fan Noise (re dBA SPL @ 1M):  47
• Required AC Mains (+/- 10%):  100V - 240V ~50/60 Hz
• IEC Power Connector:  20A IEC
• Physical Specifications:
  • Width:  19" (48.3cm)
  • Height:  3.5" (8.9cm)
  • Depth:  17" (42.5cm)
  • Weight:  30 lbs (13.6 kg)