Allen & Heath QU-32 Digital Mixing Console

 Features:

    - 32 Mic / Line Inputs (TRS + XLR)
    - 33 Motor Faders
    - 3 Stereo Inputs (TRS
    - 24 Mix Outputs (XLR)
    - 4 Stereo Groups
    - 2 Stereo Matrix Outs
    - 4 DCA Groups
    - 4 Mute Groups
    - 4 FX Engines
    - 4 FX Sends / Retus
    - 10 Soft Keys
    - 32×32 USB Audio Interface
    - DAW MIDI Control
    - AES Digital Out
    - Recallable AnaLOGIQTM Preamps
    - Qu-Drive direct Multitrack Recording / Playback on USB drives
    - 7” Touchscreen
    - iLive FX Library
    - dSNAKETM Remote Audio Port
    - Compatible with ME Personal Mixing System
    - Qu-Pad iPad App
    - Trim, polarity, HPF, gate, insert, 4-band PEQ, compressor and delay on all Inputs
    - Insert, 4-band PEQ, 1/3 octave GEQ, compressor and delay on all Mix outputs
    - Built-in Signal Generator
    - RTA with Peak Band indication

Specifications:

• Mic/Line Inputs : Balanced, XLR and 1/4" TRS jack, fully recallable
• Input Sensitivity (XLR/TRS) : -60 to +5dBu / -50 to +15dBu
• Analog Gain: -5 to +60Db, 1 dB steps
• Maximum Input Level (XLR/TRS): +19dBu / +29dBu
• Input Impedance (XLR/TRS): >5 ohm / >10k ohm
• THD+N, Unity Gain 0dB: 0.0005% -89 dBu (20-20kHz, Direct Out @ odBu 1 kHz)
• THD+N, Mid Gain +30dB: 0.001% -89 dBu (20-20kHz, Direct Out @ odBu 1 kHz)
• ST1, ST2 Connector: Balanced, 1/4" TRS jack, half normalled
• ST3 Connector: Unbalanced, stero 3.5mm Mini Jack
• Input Sensitivity (ST1, ST2 / ST3): Nominal +4dBu / 0dBu
• Trim: +/-24dB
• Maximum Input Level (ST1, ST2 / ST3): +22dBu / +18dBu
• Input Impedance: >7k ohm
• Mix1-10 and LR Out: Balanced, XLR
• Output Impedance: < 75 ohm
• Nominal Output: +4dBu = 0dB meter reading
• Maximum Output Level: +22dBu
• Residual Output Noise: -90dBu (muted, 20-20kHz)
• Stereo Alt Out & 2Trk Out: Balanced, 1/4" TRS jack
• Source (Alt Output/2Trk Output): Patchable / LR post-fade
• Output Impedance: < 75 ohm
• Nominal Output: +4dBu = 0dB meter reading
• Maximum Output Level: +22dBu
• Residual Output Noise: -90dBu (muted, 20-20kHz)
• AES Digital Output: 2 channel, 48kHz sampling rate, XLR 2.5Vpp balanced terminated 110 ohm
• dSNAKE Inputs: Remote Source for CH1-32, ST1, ST2, ST3
• dSNAKE Outputs : Patchable from Mix1-10, LR, Grp1-8, MTX1-4; Compatible with AudioRacks AR2414, AR84, AB168
• Dynamic Range: 112 dB
• Frequency Response: +0/-0.5dB 20Hz to 20kHz
• Headroom: +18dB
• Inteal Operating Level: 0 dBu
• dBFS Alignment: +18dBu=0dBFS (+22dBu at XLR output)
• Meter Calibration: 0dB meter=-18dBFS (+4dBu at XLR out)
• Meter Peak Indication: -3dBFS (+19dBu at XLR out), multi-point sensing
• Meter Signal Indication: -48dBFS (-26dBu at XLR out)
• Meter Type: Fast (peak) response
• Sampling Rate: 48kHz +/-100PPM
• ADC, DAC: 24-bit Delta-Sigma
• Latency: 1.2 ms (local XLR in to XLR out); 0.7 ms (local XLR in to AES out)
• Operating Temperature Range: 0 deg C to 35 deg C (32 deg F to 95 deg F)
• Mains Power: 100-240V AC, 50/60Hz
• Maximum Power Consumption: 150 Watts
• Dimensions (Desk Mounted): 7.4" H x 33.5" W x 19.7" D (188 mm x 851 mm x 500 mm)
• Dimensions (Packed in Shipping Box): 13.8" H x 39.4" W x 26.8" D (351 mm x 1001 mm x 681 mm)
• Weight (Unpacked): 44 lbs (20 kg)
• Weight (Packed): 53 lbs (24 kg)